美國Det-tronics公司火焰探測設備以及產品
美國Det-tronics公司火焰探測設備以及產品為那些處于高危險環境中的個人以及那些處于高危險區域的設備提供的先進的解決方案.
超越對生命**的關注，美國Det-tronics公司產品已被證明*小化總體擁有成本，同時盡量減少誤報。
美國Det-tronics公司火焰探測設備以及產品應用包括石油、 天然氣管道、 水輪機外殼、 離岸平臺、 浮動生產存儲和減負 (FPSO) 船只、 汽車制造設施、 飛機衣架、 核設施、 氫加氣站和**廠。
| | X3301 Multispectrum infrared/X3301多頻紅外火焰探測器 The most versatile and reliable detector in the world providing the earliest response to the smallest fires and the highest level of false alarm rejection. Its multi-fuel off-axis detection provides the largest area of coverage, making it an economic choice.
MORE | | | | |
| | X3302 MultispecTrum infrared/X3302多頻紅外氫氣火焰探測器 The X3302 detects hard-to-see hydrogen flames and other non-carbon-based materials without the false alarms associated with traditional technologies. Its 100ft on-axis and 100ft off-axis detection range makes it an ideal solution for hydrogen surveillance by providing four times the coverage than conventional UV technologies.
MORE | | | | |
| | x5200 UVIR/X5200紫外紅外火焰探測器 The X5200 combines a dual-infrared (IR) signal processing of the X9800 with the ultraviolet (UV) sensor of the X2200, providing a high-speed detection solution for applications where spurious UV radiation sources are typically present. This detector can operate in combination mode as a UVIR or in a single mode as a UV or IR.
MORE | | | | |
| | x9800 Single frequency ir/X9800單紅外火焰探測器 The X9800's dual-infrared (IR) signal processing rejects background infrared and maintain its high-speed detection. It is best in applications where high levels of contaminants are present and low maintenance is required.
MORE | | | | |
| | x2200 Ultraviolet/X2200紫外火焰探測器 This flame detector's ultraviolet (UV) sensor has two algorithm settings: one for high-speed and the other for increased false alarm rejection. This provides the same unique high-speed performace that we have always had in with our previous models. Ideal for detecting special fires like metal fires and sulphur.
MORE | | | | |
| | hART® COMMUNICATOR/通訊器
A portable and intrinsically safe handheld communicator that may be used to configure and test our X-Series Flame Detectors or any of our other HART devices.
MORE | | | | |
| | pm-5mpx dual spectrum ir This dual infrared flame detector is designed to see both nonhydrocarbon and hydrocarbon fires typical in semiconductor fabrication or gas cabinets. It's sealed polypropylene enclosure is suitable for explosion-proof, classified areas.
MORE | | | | |
| | Apollo Smoke and Heat detectors These addressable smoke and heat detectors are compatible with the Eagle Quantum Premier® (EQP) safety system via the Addressable Smoke and Heat (ASH) Module.
MORE | | | | |
| | U5005 Smoke Detector U5005 Smoke Detector is a sensitive, yet rugged, state-of-the-art protection device that is designed for classified areas in hazardous industrial and commercials locations.
MORE | | | | |
| | U5006 Air Duct smoke detector This smoke detector uses the technology of the U5005 but is mounted into a fiberglass NEMA 4 enclosure. It is designed to detect the presence of smoke for the primary purpose of controlling blowers and dampers in AC and ventilation systems.
MORE | | | | |
| | Surveillance and Hazard Detection Combine state-of-the-art flame detection with an industrial grade camera to monitor hazards and events. The system can be as simple or as complex as required. Your tailored surveillance system can include real-time viewing, remote monitoring with internet accessibility, and pre/post event recording.
MORE | | | | |
| | OBSOLETE PRODUCTS Products listed in this section are no longer in production, but may have replacement spare parts available. Click here for suggested factory replacement options and user manuals.
MORE | | |
